HOW TO RESET CANON MP SERIES



MP150, MP160, MP170, MP180, MP450, MP460. MP150, MP160, MP170, MP180, MP450, MP460

If you encounter an error like "Ink absorber is full" or "Error Code 5B00" Display in your  computer while you using the printer  or an Error Code 27 display in the front panel of your printer . Its mean that the Printer Counter Protection is Full and it required a reset and Ink wastepad must be replacement or you clean the wastepad if you have no replacement, if you want your printer to work normal again. There are two ways how to troubleshoot  the Canon MP Series printer, first One we to reset manually using hardware method and second  by using a Software tool to reset permanently the EEPROM of the printer.

 Below is the procedure on how to reset your Canon MP Series printer. 

1. Download the MPTOOL.
here: http://www.4shared.com/rar/lpVUM3ij/MptoolV094.html

2. After Downloading the MPTOOL, we must manually reset first the Printer using hardware method but this method is not a permanent reset the EEPROM.

here the procedure to reset manually.


  1. Turn off the Printers.
  2. Press and Hold the button Resume/Cancel then press POWER button.
  3. Release the Resume/Cancel button while keeping POWER button on press.
  4. Press Resume/Cancel 2 times and then release all the buttons.
  5. When the indicator recorded GREEN - click Resume/Cancel 4 times!
  6. Turn off and On the Canon Pixma MP Printers. And your done.


3. After manually reset the printer using hardware method now to reset permanently the EEPRON of the printer we need to run the MPTOOL that we download earlier.

here the procedure to reset using Software.

  1. Turn off the Printers.
  2. Press and Hold the button Resume/Cancel then press POWER button.
  3. Release the Resume/Cancel button while keeping POWER button on press.
  4. Press Resume/Cancel 2 times and then release all the buttons.
  5. When the indicator recorded GREEN - Go to MP TOOL Select the model of the printer and Reset Main and Reset Plater follow the image.
  6. Turn off and On the Canon Pixma MP Series Printers. And your done you can now start to print normally.
 Using Mptool Software is very easy to use, than the other software, just follow the procedure and your done. 


thank for you viewing 

No comments:

Post a Comment